|
|
 |
|
Installing
the thesaurus library
Note:
you must have already upgraded your QuickpadIR to
the latest version (3.06) and your unit must be
thesaurus capable (extended memory installed).
After upgrading to version 3.06 power up the unit
and check the version number.
Version
3.06-E-K2t 03/08/2006 (H4)
If you see a small letter t you can
proceed with the install (step 4-8). If you see a
capital T then you already have the thesaurus
installed, nothing further is required. If you
see a space instead then no extended memory is
available and you won't be able to upgrade the
unit yourself. If you see an H4 your unit can be
factory upgraded however.
STEP 4
Download qpthes.zip and save it to
your desktop. Since it is a "zip" file
you will need to "unzip" it (decompress
it). Most PCs already have a winzip installed so
all you will need to do it double-click the
qpthes.zip icon. Otherwise, download WinZip for free, if you
need it. See the WinZip instructions if you need help.
When you double-click the qpthes.zip icon on the
desktop winzip will start and you'll see
something similiar to this:
You should see 24 files listed as above. Now
click the extract button to get the file save
screen:
Create a new folder (c:\thes) as shown and press
the extract button. The 24 files will be
extracted and saved in the folder you created.
STEP 6
On your PC double click the
QPIR13 icon to start the file transfer program.
Be sure your Quickpad is connected to a serial
port of your computer, just as it was when you
upgraded to the latest version. With the Quickpad
turned on and at the main menu press CTRL-X,
which starts the Quickpad "talking" to
the PC. On the PC, press the "Connect
Port" button. Momentarily
you should see the Quickpad folders F1-F10 appear
on the QPIR13 screen as shown:
You must first click on folder F01 to highlight a
destination. Then, using the box labeled
"Local PC Directories" find and
highlight the "thes" folder you created
earlier. You should see all 24 files you
previously extracted with winzip.
STEP 7
On the PC, in the "PC
Files in Current Directory" box, highlight
(click once) the QP1.S00 file. Scroll down to the
last file in the list (use the arrows or slider),
and while holding the shift key down highlight
the QP1.T04 file. All 24 files should now be
highlighted as shown below. If they are not you
must repeat the procedure.
STEP 8
Final step!! Click on "Copy
to Quickpad". You'll see some
messages on the Quickpad screen, and after a
moment you'll see file transfer screens on the
PC. When the file transfer activity on the PC
stops you are finished. This will take
approximately 5 1/2 minutes, please be patient.
When all tranfers have stopped click the "Done" button. Your
Quickpad IR now has an upgraded spellchecker and
new thesaurus capability!! |
|
